1,220 mAh capacity rechargeable lithium ion battery supplied with the camera body. Can be recharged about 500 times.
* The BLN-1 is only compatible with the BCN-1
1,150 mAh capacity rechargeable lithium ion battery supplied with the camera body. Can be recharged about 500 times.
* The BLS-5 is only compatible with the BCS-5
1,150 mAh capacity rechargeable lithium ion battery supplied with the camera body. Can be recharged about 500 times.
The BLM-5 is 1,620 mAh capacity lithium ion battery and can be recharged approximately 500 times.
* The BLM-5 is only compatible with the BCM-5
1,500 mAh capacity rechargeable lithium ion battery supplied with the camera body. Can be recharged about 500 times.
3,400 mAh, high-capacity rechargeable lithium ion battery for use with the HLD-2 Power Battery Holder. Can be recharged about 500 times (will vary depending on conditions of use).
The BCN-1 can recharge a BLN-1 in about 3 hours (at normal temperature). These units are rated for 100 to 240 volts which allows them to be used internationally.
* Power outlet shapes vary by country/region, so be sure you have the appropriate plug(s) before traveling.
The BCS-5 can recharge a BLS-5 in about 210 minutes (at room temperature). These units are rated for 100 to 240 volts which allows them to be used internationally.
* Power outlet shapes vary by country/region, so be sure you have the appropriate plug(s) before traveling.
This dedicated charger for the BLS-1 Lithium Ion Battery can recharge a BLS-1 in about 210 minutes (at room temperature). Rated input voltage of 100 to 240 V allows use internationally*.
* Power outlet shapes vary by country/region, so be sure you have the needed plug(s) before traveling.
The BCM-5 can recharge a BLM-5 in about 210 minutes (at room temperature). These units are rated for 100 to 240 volts which allows them to be used internationally.
*Power outlet shapes vary by country/region, so be sure you have the appropriate plug(s) before traveling.
This dedicated charger for the BLM-1 Lithium Ion Battery can recharge a BLM-1 in about 5 hours (at room temperature). Rated input voltage of 100 to 240 V allows use internationally*.
* Power outlet shapes vary by country/region, so be sure you have the needed plug(s) before traveling.
This dedicated charger for the BLM-1 Lithium Ion Battery can recharge a BLM-1 in about 2 hours (at room temperature). Rated input voltage of 100 to 240 V allows use internationally*.
* Power outlet shapes vary by country/region, so be sure you have the needed plug(s) before traveling.
This dedicated charger for the BLL-1 Lithium Ion Battery can recharge a BLM-1 in about 2 hours. Rated input voltage of 100 to 240 V allows use internationally*.
* Power outlet shapes vary by country/region, so be sure you have the needed plug(s) before traveling.
A package including the BLS-5 Lithium Ion Battery and BCS-5 Lithium Ion Battery Charger.
A package including the BLM-5 Lithium Ion Battery and BCM-5 Lithium Ion Battery Charger.
This power battery holder is designed exclusively for the OLYMPUS OM-D and accommodates one BLN-1 Lithium-ion Rechargeable Battery*. When a total of two BLN-1 batteries, one inside the OLYMPUS OM-D and the other inside the HLD-6, are used, the camera can record about 650 images (according to the CIPA test standard). Which battery is consumed in priority can be selected in a menu.
* The BLN-1 Lithium-ion Rechargeable Battery is not provided with the HLD-6.
Equipped with a shutter release button and other controls including a dial and vertical operation lock knob for smooth operation during vertical-holding shooting. Accommodates up to two BLS-1 Li-ion batteries - the same type used by the E-620 camera, enabling extended shooting sessions.
To deal with a large shooting volume, the HLD-4 holds up to two BLM-1 or BLM-5 Lithium Ion Batteries. In addition to a shutter button for vertical shooting, a 2-button, 2-dial control system is provided to ensure the same operability as in horizontal shooting. And the exterior is sealed at several points to provide dust- and drip-proof performance at the same level as the E-3/E-5 camera body.
Holds two BLM-1 Li-ion Batteries.
Convenient for long-duration shooting.
A holder for use with the BLL-1 high-capacity lithium ion battery. The built-in shutter button, main dial, sub-dial, AEL button, and AF frame selector are handy for when shooting photos in portrait orientation.
A package including the BLL-1 high-capacity lithium ion battery, BCL-1 lithium ion battery charger, and HLD-2 power battery holder.
Specially designed to accommodate AA-size batteries, the AABH-1 battery holder can be used with the HLD-4 in place of the BLM-1 type rechargeable batteries in situations in which recharging is difficult such as when traveling or in the case of an emergency.
Can hold three CR123A lithium batteries for use with the camera body instead of the standard BLM-1 Li-ion Battery when battery recharging is difficult during a trip or in an emergency. Handy carrying case is included.
This is the AC adapter for exclusive use with the HLD-6 Power Battery Holder. With a cord length of 2.3 meters, it is convenient even when the system is used in a large studio.
Rated input voltage of 100 to 240 V allows use internationally*.
* Power outlet shapes vary by country/region, so be sure you have the needed plug(s) before traveling.
